Lens adapters are used as additional lenses to change the field of view or image format.
Our Lens Adapters are designed to compliment the lenses they are used with to produce hi-resolution images with minimal distortion.
225-000 16:9 Anamorphic Adapter
16:9 Anamorphic AdapterDesigned specifically for miniature 4:3 aspect broadcast quality CCD cameras.
The Anamorphic Adapter converts the image ratio so that when recorded by a 4:3 aspect camera the image is captured as 16:9. The design is small and compact to suit the miniature cameras.
287-000 0.5X Wide Angle Zoom Adapter
Designed to double the field of view throughout the zoom range of any zoom camera. This Adapter is attached to the prime lens via the M37 filter thread.
Innovative high performance 0.5x wide angle adapter designed to provide a true 0.5x field of view (FOV) whilst maintaining minimal distortion and high resolution throughout the zoom range of your camera.
To date all ‘off the shelf’ wide angle adapters have offered a compromise between FOV, distortion and resolution. If the lens achieves the FOV and minimal distortion then the compromise will be the resolution and so on. The result often is ‘milky’ out of focus images that get progressively worse the nearer you get to full zoom.
387-000 0.7X Wide Angle Adapter
The 387-000 0.7X Wide Angle Adapter has been design specifically for use with the Fujinon TF4XA-1 4mm 3CCD HD lens. The 387-000 converts the 4 mm prime lens to a 2.8 mm focal length while maintaining the high definition 200 cycle performance of the prime. The 387-000 Wide Angle Adapter will increase the Horizontal FOV from 71° to a minimum of 95°.
The MTF curve below shows the performance of the Wide Angle Adapter. Please note that when measuring the performance of an adapter that works with a prime lens the MTF is measured as Angular Frequency in cycles per milliradian. In this instance 0.40 mr is equal to 100 cycles.
Dimensions of the 387-000 are 60.5 mm diameter and 34 mm long. The adapter mounts on to the TF4XA-1 via the 30.5 mm external thread on the front of the prime.
The 387-000 Adapter has an M60 x 0.5 thread on the front to facilitate the mounting of filters.